Size: 6.6′x8.2. Installed on the vehicle rooftop rail to provide 54 sq. Ft shade, easily cover area to shield from sun, rain, and wind. Made of 420D oxford fabric with 2000mm PU coating, UV50+ protection and water resistance; Stable aluminum alloy structure, rust resistant and standing in calm conditions. Telescoping poles with twist-lock design, quickly extend and collapse, provide quick and simple setup and tear-down; Adjustable Height: 45 1/4″ x 85 1/16″ (115 to 216 cm). Installation hardware, made of high-quality 304 stainless steel, is INCLUDED. Can be retracted, saving space; Waterproof carry bag.
OPENROAD 270 DEGREE FREESTANDING AWNING combines a massive shade footprint with a compact pack size. The unique 270 degree shape provides more than 10sqm of cover wrapping around the side and rear of your vehicle, and the included universal wall is easily attached to extend your cover or provide privacy. Lightweight U-channel alloy rafters house integrated upright poles for fast and easy set up and pack down. For even more cover, an included roof panel slides into the last rafter to tie to your roof rack to protect that back of your vehicle in bad weather. Premium mounting hardware is included, and suits most roof rack configurations. Unique 270 shape provides maximum shade footprint of up to 10m2t. Includes universal wall, extend your awning and provide privacy. Heavy duty, seam sealed 600D oxford fabric. Reduces temperatures up to 10 degress and blocks 95% of light. Lightweight, heavy duty U-channel alloy rafters for strength and durability. Integrated poles allows for easy set up and pack down. Slimline and aerodynamic pack size. Includes mounting brackets and hardware to suit most roof rack systems. Weight (Including outer Carton): 25.8kg. Weight Awning Only: 22.3kg. Dimensions (Open): See diagram. Dimensions (Closed): 2.2m x 0.2m x 0.16m.
OPENROAD 270 DEGREE FREESTANDING AWNING combines a massive shade footprint with a compact pack size. The unique 270 degree shape provides more than 10sqm of cover wrapping around the side and rear of your vehicle, and the included universal wall is easily attached to extend your cover or provide privacy. Lightweight U-channel alloy rafters house integrated upright poles for fast and easy set up and pack down. For even more cover, an included roof panel slides into the last rafter to tie to your roof rack to protect that back of your vehicle in bad weather. Premium mounting hardware is included, and suits most roof rack configurations. Unique 270 shape provides maximum shade footprint of up to 10m2t. Includes universal wall, extend your awning and provide privacy. Heavy duty, seam sealed 600D oxford fabric. Reduces temperatures up to 10 degress and blocks 95% of light. Lightweight, heavy duty U-channel alloy rafters for strength and durability. Integrated poles allows for easy set up and pack down. Slimline and aerodynamic pack size. Includes mounting brackets and hardware to suit most roof rack systems. Weight (Including outer Carton): 25.8kg. Weight Awning Only: 22.3kg. Dimensions (Open): See diagram. Dimensions (Closed): 2.2m x 0.2m x 0.16m.
Multi Functional? : This car awning is suitable for installation on vehicle roof railings, providing 5.2ft x 8.2ft shade, standing in calm conditions to block sunlight, rain, and wind, providing outdoor rest and enjoying natural space. High Quality? : Our car awning camping is made of 420D Oxford cloth and heavy-duty PVC bag outer cover, with 5000mm PU coating, Providing powerful waterproof function and sun protection, Stable aluminum alloy structure, rust proof, long service life, firmly fixed to the vehicle, not moving due to wind or other external factors, making your outdoor activities comfortable and safe. Strong Compatibility? : The telescopic rod can adjust its height freely and can be quickly retracted and folded through a twist lock design to adapt to different vehicle heights. Upgrade the L bracket to 23CM. Our vehicle Awning is suitable for SUVs, cars, trucks, SUVs, vans, land camping trailers or almost any vehicle with roof brackets. Quick Installation? : Installation or disassembly can be completed in just a few seconds. After folding, The car awning camping retractable is compact, lightweight, and easy to carry. The internal printing design is more simple and elegant, enhancing your camping experience. Perfect Camping? : You can easily enjoy camping, picnics and car trips with family and friends. Specifications: Material: Aluminum Alloy and 420D Oxford Fabric Color: Gray Overall Dimension (Unfolded): 5.2×8.2ft / 160x250cm Adjustable Height: 115 to 250cm Weight: 22lbs (10kg) Distance Between Roof Rail and Car Roof:? 13/16″ (2 cm) Compatible Rail Width:? 3 3/8″ (8.5 cm) Space of Mounting 2 Brackets:? 39 3/8 (100 cm) Package Contents: – 1x Awning5.2ft x 8.2ft, 45sq. Ft, Gray – 1x Installation Tool Set – 1x Manual. Novsight car side awning is a versatile and durable sunshade that fits any vehicle with a roof rack and is made of high-quality materials to handle brutal weather. The fabric blocks UV rays and is the perfect buddy for outdoor trips. It will boost your fun by giving your family a comfy, shaded spot to sit. If you are unsure about the suitability of the vehicle, please send us an enquiry with your vehicle specification, roof racks and photos for a check. To avoid initiating an unpaid item claim, please pay within 7 days. We always put our customers first and your satisfaction is guaranteed. We will solve the problem! Our Tech’s are here to serve you.
3 Window Shading Design? : The NOVLIGHT Hardshell Rooftop Tent features a three window shading design, providing comprehensive shading and ventilation. Allowing you to enjoy camping time leisurely and comfortably. ? Complete accessories / travel is more convenient! Newly upgraded car rooftop tent add Installation kit, RGB light with remote control, Handle 3, zipper for YKK, Shoe bag, 5 cm thick sponge cushion and retractable 2.3m ladder. The overload equipment of hard shell rtt allows you to carry more luggage, provide lighting for the night, provide a comfortable resting environment, and facilitate entry and exit of the tent. ? Aluminum Alloy? : The rooftop tent is made of aluminum alloy hard shell and aluminum honeycomb board, with strong load-bearing capacity and not easy to deform; The waterproof pressure is 3000Pa, and the surface gel coating is superior to ordinary spray paint, which can resist level 6 wind. ? High Density Sponge Pad? : Our roof top tent is equipped with a 5cm high-density sponge pad, which is soft, comfortable, and does not deform, making sleeping more stable; All windows are covered with high-quality spinning layer, which is ventilated and breathable, providing the best warmth and moisture resistance. ? Pop-up Hydraulic Rod? : You can quickly build it in 10 seconds. The air support rod of the roof top tent hardshell can be pushed and retracted within a few seconds; Compared with other iron hydraulic rods, they do not easy to rust, have a long service life, and can be safely driven even on rough terrain. Warm and Soft Foam Mattress. Tent fabric: polyester cotton fabric T/C plaid fabric+surface gel coat layer. Shell: Aluminum honeycomb board. Mattress: high-density flame-retardant sponge pad+detachable sponge cover. Ladder: 2.3m retractable aluminum ladder. Hydraulic rod: stainless steel material. Capacity: Suitable for 2-3 people. Unfolded size: 82.7 x 56.3 x 63 inches. Compact size: 82.7 x 56.3 x 9 inches. Sleeping footprint: 56.3 Width. Peak internal height: 63cm. Weight: 174 lbs (79KG). Mattress height:50mm(Removable sponge cover). Ladder: 70-230cm Retractable Ladder. 1.2M RGB LED LIGHT STRIP. SET UP IN 3 SECONDS. LARGE SPACE AND SLEEP IN COMFORT. 3 OUTER EAVES DESIGN. Question 1: Does it fit my car? Answer : If your car meets or is similar to these conditions. Roof luggage rack crossbar load capacity: more than 200 kg/440.93LBS. The height of the crossbar from the roof: more than 8 cm/31.5 Inch. Bar width: maximum width 120 cm/47.24 Inch. Please know the width and length of your car roof. If you have any issues, please consult our service support team directly. Question 2: How many people capacity? Answer: Maximum capacity: 3 people. 2 adults and 1 child. 1 adult and 2 children. 2 adults(not higher than 6.5ft). If there are 3 adults, it may be a bit crowded. As long as the height is not higher than 6.5ft, it can be accommodated. Question 3: How long will it take to get my orders? If you don’t get it, please get in touch with us first; we’ll try our best to support you. Novsight car side awning is a versatile and durable sunshade that fits any vehicle with a roof rack and is made of high-quality materials to handle brutal weather. The fabric blocks UV rays and is the perfect buddy for outdoor trips. It will boost your fun by giving your family a comfy, shaded spot to sit. Our vehicle Awning is suitable for SUVs, cars, trucks, SUVs, vans, land camping trailers or almost any vehicle with roof brackets. If you are unsure about the suitability of the vehicle, please send us an enquiry with your vehicle specification, roof racks and photos for a check. To avoid initiating an unpaid item claim, please pay within 7 days. We always put our customers first and your satisfaction is guaranteed. We will solve the problem! Our Tech’s are here to serve you.
A Simple And Practical lifting and Storage method for your (HARD SHELL) Roof Top Tent. Free up valuable floor space! Also, will assist you in lifting to mount on your Vehicle if two people are not that strong. 9 FEET OR HIGHER GARAGE CEILING IS REQUIRED FOR THIS TO LIFT. This strap system will work with a variety of Hard Shell Rooftop Tents. (Max Weight 220 Lbs). Measure the circumference of your HARD SHELL Rooftop Tent. Measure the Width x Height x 2 = your circumference. MAX Circumference is 158 inches Total. If you are not sure just ask. Let me know what model you have. And I will need to know the width of across you Hard Shell Tent. And The Height Of your Hard Shell Tent. You will also need a piece of 2 x 6 wood and depending on garage rafter spacing either a 17 or 25 inch piece of 2 x 6 wood based on your rafters spacing. (YOU WILL NEED TO INSTALL THIS ACROSS 2 GARAGE RAFTERS) (Max Weight 220 Lbs). WHATS INCLUDED: THE XT STRAP with quick release buckles. The Aluminum Mounting Bar. 1 drill bit, 6 mounting Lags. 6 Lock washers, 6 Flat Washers. (THIS NEEDS TO BE INSTALLED ACROSS 2 Rafters). If Starting from the Ground. This will make it easier to get the strap Fitted around your Hard Shell Tent. I can recommend the electric Hoist I use if you would like. If the Quality and or Material or Hardware is defective. Made In The United States. Ultra durable seat belt material and 60 lbs fire wire thread. Laser welded D Rings 2 each capable of 400 Lbs.
OPENROAD 270 DEGREE FREESTANDING AWNING combines a massive shade footprint with a compact pack size. The unique 270 degree shape provides more than 10sqm of cover wrapping around the side and rear of your vehicle, and the included universal wall is easily attached to extend your cover or provide privacy. Lightweight U-channel alloy rafters house integrated upright poles for fast and easy set up and pack down. For even more cover, an included roof panel slides into the last rafter to tie to your roof rack to protect that back of your vehicle in bad weather. Premium mounting hardware is included, and suits most roof rack configurations. Unique 270 shape provides maximum shade footprint of up to 10m2t. Includes universal wall, extend your awning and provide privacy. Heavy duty, seam sealed 600D oxford fabric. Reduces temperatures up to 10 degress and blocks 95% of light. Lightweight, heavy duty U-channel alloy rafters for strength and durability. Integrated poles allows for easy set up and pack down. Slimline and aerodynamic pack size. Includes mounting brackets and hardware to suit most roof rack systems. Weight (Including outer Carton): 25.8kg. Weight Awning Only: 22.3kg. Dimensions (Open): See diagram. Dimensions (Closed): 2.2m x 0.2m x 0.16m.
OPENROAD 270 DEGREE FREESTANDING AWNING combines a massive shade footprint with a compact pack size. The unique 270 degree shape provides more than 10sqm of cover wrapping around the side and rear of your vehicle, and the included universal wall is easily attached to extend your cover or provide privacy. Lightweight U-channel alloy rafters house integrated upright poles for fast and easy set up and pack down. For even more cover, an included roof panel slides into the last rafter to tie to your roof rack to protect that back of your vehicle in bad weather. Premium mounting hardware is included, and suits most roof rack configurations. Unique 270 shape provides maximum shade footprint of up to 10m2t. Includes universal wall, extend your awning and provide privacy. Heavy duty, seam sealed 600D oxford fabric. Reduces temperatures up to 10 degress and blocks 95% of light. Lightweight, heavy duty U-channel alloy rafters for strength and durability. Integrated poles allows for easy set up and pack down. Slimline and aerodynamic pack size. Includes mounting brackets and hardware to suit most roof rack systems. Weight (Including outer Carton): 25.8kg. Weight Awning Only: 22.3kg. Dimensions (Open): See diagram. Dimensions (Closed): 2.2m x 0.2m x 0.16m.
Recent Comments